Sunco Lighting 4 Pack LED Ceiling Panel, 2×4 FT, 50W, Dimmable 0-10V, 5500 LM, 5000K Daylight, Flat Backlit Fixture, Direct Wire, Recessed/Drop Ceiling Install, Dust Tight Commercial Grade – ETL, DLC

Added to wishlistRemoved from wishlist 0
Add to compare
Category: Tag:


Price: price a - (Details)


Product Description

sunco recessed lighting ceiling fixture retrofit install junction box can slim downlight LEDsunco recessed lighting ceiling fixture retrofit install junction box can slim downlight LED

LED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight CommercialLED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight Commercial

2x4 ceiling panel 5500 lumens 50,000 hour life span2x4 ceiling panel 5500 lumens 50,000 hour life span

LED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight CommercialLED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight Commercial

LED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight CommercialLED Ceiling Panel 2x4 Dimmable 0-10V Flat Backlit Fixture Flush Drop Ceiling Dust Tight Commercial

How do I secure the Sunco LED Ceiling Panel to a drop ceiling?

Your LED Ceiling Panel comes with protective brackets on the back of the panel. These bright, metal “L” shaped pieces are flush against the light panel for easy transport. Simply bend each piece up 90° and then twist to the hook portion faces the outside edge of the Ceiling Panel. For full installation details, please read our installation manual.

Do I have to install the LED Ceiling Panel in a drop ceiling or can I suspend it?

Either type of install is possible with our LED Ceiling Panel Light.

· Drop Ceiling Install – Mount it flush against a drop ceiling.

· Suspension Install – Suspend from a wire so it hangs horizontally away from the ceiling. Suspension kits are not included with the panel, but they would include an anchor, wire rope, and hardware.

What does a Class 2 circuit mean?

A Class 2 circuit is a low voltage circuit located between the load side of a Class 2 power source and the connected equipment. The power supply in this case would convert 120V power into low voltage. The National Electric Code (NEC) Article 725 designates Class 1, 2, 3 wiring details. Class 2 wiring uses conductor sizes 18 AWG or 16 AWG. Class 2 provides acceptable protection from an electric shock and is considered to be safe from fire risk.

There are 2 wiring compartments on the back of the Sunco LED Ceiling Panel. Why is that?

Our LED Ceiling Panels include two driver covers on the back of the panel. One holds the wiring to power the light itself. That one should include a black wire (L), white wire (N), and green wire (ground). The other one includes wires to connect your compatible dimmer if you want to add one. Dimmers are not included when you purchase the light. The Sunco LED Ceiling Light Panel fixture is dimmable via 0-10V dimming. Originally, 0-10V dimming was used as a standard means to control fluorescent dimming ballasts. You can use it on some drivers on LED lights, including this one. On LED lights, 0-10V dimming controls LED output intensity to change how much light is emitted.

What is 0-10V dimming?

On LED lights, 0-10V dimming controls LED output intensity to change how much light is emitted (i.e., 1V is 10%). 0-10V dimming allows you to scale the output of your dimmable LED light to create the lowest dimming level possible.

What sort of maintenance is required on the Sunco LED Ceiling Panel?

This ceiling panel is dustproof with no gap in the fixture, so the fixture won’t dim over time due to dusty conditions and areas. Also, with its integrated LEDs, the LED is part of the light fixture. You will not need to relamp an integrated light fixture during its lifetime. The sole maintenance you will need to do is to periodically clean the surface of the ceiling panel light if you have it installed in an area where ceilings collect debris. Use a soft cloth and gentle detergent for cleaning the lens.

Wattage

50W

200W

240W

40W

72W

Lumens

5500 LM

28,000 LM

33,500 LM

3500 LM

8500 LM

IP65 – Waterproof

Dimmable

Install

Direct Wire

Direct Wire

Direct Wire

Direct Wire

Direct Wire

Voltage

100-277V

100-277V

100-277V

100-277V

100-277V

DLC Eligible

✅ DIMMABLE – Seamless dimming capabilities (0-10V), our LED ceiling panel provides instant bright light and no buzzing or flickering for maximum eye comfort. Ideal applications include retail locations, showrooms, schools, healthcare facilities and commercial office buildings.
✅ COMMERCIAL GRADE – Sunco’s LED ceiling panel replaces outdated HID fixtures or fluorescent tubes to provide a higher energy efficiency. Certifications: ETL, DLC. Specifications: 50W, 5500 LM, 5000K, 100-277V, and +50,000 hours.
✅ SIMPLE INSTALL – Follow our installation guide for a quick and easy setup of our LED backlit panel. Durable steel frame with dust tight design, suitable for recessed or drop ceiling installation, equipment included (brackets, wire nuts, jbox).
✅ SUNCO BENEFITS – 10-Year Warranty! We uphold the highest standards for all our products by testing each product for optimal performance and safety. Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists..

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Sunco Lighting 4 Pack LED Ceiling Panel, 2×4 FT, 50W, Dimmable 0-10V, 5500 LM, 5000K Daylight, Flat Backlit Fixture, Direct Wire, Recessed/Drop Ceiling Install, Dust Tight Commercial Grade – ETL, DLC”

Sunco Lighting 4 Pack LED Ceiling Panel, 2×4 FT, 50W, Dimmable 0-10V, 5500 LM, 5000K Daylight, Flat Backlit Fixture, Direct Wire, Recessed/Drop Ceiling Install, Dust Tight Commercial Grade – ETL, DLC
Lamps Buyers Guide
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart