Interior Dome LED Light Kits

Posted on: May 7, 2018, by :

It seems the lights are sensitive and needs a decent connection. One buyer adjusted one of the metal pieces on the reading lights just a hair to make sure the connection was good and his light then worked. Also on the dome lights we had another user let me know what happen to him when it blew a couple fuses. This was on a 2015.

MAP Lights: I believe this is where most people are having problems blowing fuses. Use the Pick to remove the lenses as shown in the video on page 9 of this thread. Push the pick into the lense notch rotate and pull. Then do the slide and pull method to finish removing it. Use the pick to remove the bulk by prying and pulling on the bulb at its base. It is a bit stiff but be patient and try to catch it. The first reason people are blowing fuses is the prongs in the base of the outlet need to be slightly bent back into position so the new bulb is secure. They can get bent open too wide when the factory bulb is removed causing a bad conection when the new bulb is put in. This next move is VERY IMPORTANT. The Map bulb has a + and a – side. INSTALL THE + SIDE SO THE + IS FACING TOWARDS THE DOORS OF THE TRUCK. The – will face towards the center of the truck. Replace the lense in reverse.

You are currently viewing as a guest! To get full-access, you need toregister for a FREE account.

SCHALICKE said:Installed mine yesterday and they look great.

Ill take the $16.99 please PM your paypal.

Carefully removed original bulb, used voltmeter to confirm polarity of dome light socket and match the new led bulb to it (led was marked with +\-). Make sure everything is even and square and not seeing any contact between bulb and anything else. Tried and it worked. Have turned it on and off several times and all looks good.

You can paypal. I sent you a pm with the info.

Discussion in2nd Gen Tacoma Parts Marketplace (2005-2015)started byMedlinAroundOct 8, 2014.

Are this the cool white light? If there just like the first picture Im definitely in. Id like the whole full on kit.

Forum: 2nd Gen Tacoma Parts Marketplace (2005-2015)

Vanity Mirror (Sunvisor) lights: use a small screwdriver inserting on the ouside edge and GENTLY pry and it pops right off. There is a small ended on the inside edge to put the screwdriver but it would not work for me. Remove the factory light with a pic, grabbing behind the top of the metal conector. Install the LED. There is no polarity issue here or I just got lucky. Be sure to slightly rotate the bulb inward towards your face so the light shines on it. If you put it straight in the light does not light up your face evenly it points kind of past you. Replace lense inside tabs first pressing gently.

Failure is the result of letting setbacks stop you

Participate in all Tacoma discussion topics

Customer Installation Tips for installing

Failure is the result of letting setbacks stop you

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

Failure is the result of letting setbacks stop you

Icon/All Pro…..chopped for 35s

Perfect! Im in, Ill take the $16.99 package.

Fired up my 12v supply and tested bulb, it worked. So bulb was good.

-LED Kits for 2nd Gens *AND NOW 3rd GEN as well!!* . We got tired of the factory lights inside the cab not being bright enough when searching through the Tacoma cab at night. With nearly 1,000 kits sold and many happy customers on just Tacomaworld alone, here is what you get:

Yes, the lights are 12v White. 50,000 working lifespan.

Thread: Interior Dome LED Light Kits

Support a fellow TW member instead ofebay!

17 Method Grid Titanium rims w/ Pro Comp Sport A/T 265/70/17 tires, Mobtown Offroad ribbed Tailgate skin, Painted rear bumper and grill logo black, color match grill surround. LEDs in map, license plate, center console, and dome lights. Anytime driving lite mod, debadged, vent visors, AA Maglite mounted under center console armrest. Antitheft hose clamp on tailgate, LED backup lights in rear bumper, LED bed lighting kit. LED spot lights in lower front bumper. Weathertech floor mats. Painted various interior parts black.

I put the kit in my truck around 3 months ago. Im very pleased with it. 2-3x more light inside of my cab now. The lights have a positive and negative side and simply push in. I installed all the LEDs (including 2 in for my headlight running lights) in maybe 5-10 minutes.

Yup. One posivie and negative side. Just touch it and it if they dont light, turn them around and theyll light up. They push in just like factory bulbs.

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

Kit 3 Includes:two reading + dome light-$20.99

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

TinyTech626AndresBiscuitsand4 otherslike this.

Access all special features of the site

Im in for the 16.99 package… How do I order?

I hope this helps. Good luck and enjoy the bright light. Is very nice and well worth it.Click to expand…

Failure is the result of letting setbacks stop you

I have no clue what was causing the fuse blowing. But it seems to be ok now. I will monitor and let you know if it blows again.

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

Ill check my plate lights tonight to double check if I like em or not and decide which package.

Communicate privately with other Tacoma owners from around the world

Thats a FULL interior LED kit for just $24.99 shipped!!

2nd Gen Tacoma Parts Marketplace (2005-2015)

Just bought some clear ultra bright Phillips from Pep boys for the license plate and so far they suck…..would these LEDs just plug right in too?Click to expand…

Kit 4 Includes:two reading + dome light + 4 vanity visor lights.$27.99

I did blow a fuse when installing the map light and I am sure I had the – side of the buld facing out instead of in. I may have gotten lucky on the rest but this is how I did it.

Here is what is included in the + plate kits.

Im in, how do i order them up?

2nd Gen Tacoma Parts Marketplace (2005-2015)

Philips 921 Bright White Vision LED Back-up light, 2 Pack

DOME LIGHT: I used the Screwdriver to pry open the lense in the designated spot and then used the pick in a slide and pull motion to get it off. Remove the factory bulb. Insert the LED bulb with the lights pointing down into the truck with the majority of the small holes towards the front of the truck. This will make sense when you look at the bulb. Replace the cover in reverse of removal.

Icon/All Pro…..chopped for 35s

Icon/All Pro…..chopped for 35s

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

Ketofa 4x red Car T10 158 194 168 W5W 5050 SMD Car Side Wedge Tail Light Bulb LED Lamp DC 12V Lights Super Bright High Power

As a registered member, youll be able to:

Icon/All Pro…..chopped for 35s

Installation Videos and Pictures

Ill take the 14.99 package. I will Paypal you.

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

When Installing the LEDs,do notforce the light in if it doesnt come on. Simply turn the light around (positive and negative sides are not marked) and place in. Very little connection should power the light on the correct way. If you force the LEDs in, it could blow a fuse in your Tacoma!Here is a couple simple solutions from prior users as well:

Failure is the result of letting setbacks stop you

These pricesincludeshipping to the lower48 states!!

Kit 1 Includes: Two reading + dome light -$18.99

Failure is the result of letting setbacks stop you

Im in for the 16.99 package… How do I order?

Are this the cool white light? If there just like the first picture Im definitely in. Id like the whole full on kit.

Fox 2.5 c/o, Camburg UCA, OME Dakar, Fox 2.0 rear, LED interior light kit, LED fogs, LED headlights, Nitto G2, MB black wheels, diff breather mod, All AMSOIL syn fluids, XRXS bed cross bars, full debagged, shortened OEM antenna mod, Wet suit seatcovers, and fog light any time mod.

Just bought some clear ultra bright Phillips from Pep boys for the license plate and so far they suck…..would these LEDs just plug right in too?

Yes, the lights are 12v White. 50,000 working lifespan.

Bilstein 5100s (.85), OME 885X Coils, AAL, Magnaflow exhaust, Volant Intake, OKledlight pods, Front Skid Plate, 4% Tinted Windows, Weathertec Floor Liners, Double Din Pioneer Player, 2 10 Memphis SR Subs, Plasti Blacked out Bumper, Grill, & Emblems, Custom Bed Rack, TRD Nation interior LED dome kit, 4X innovations sliders, DIY Roof Rack, Storage – Rotopax, Pelican 1600 waterproof case, Plano 42case, Smittybilt RTT.

Total Chaos +2 Long Travel Kit; King/TC 2.5 LT C/O w/ 16×600; TC/CVJ Extended Axles; TC Spindle Gussets; King 2.5 RR shocks; All-Pro Expendition Leaf Pack; Pelfreybilt Sliders; Anti-Dark LED Hood Light mod; LED map and dome light mod; Bed lights; TRD Cold Air Intake; KB Voodoo Tailgate cap system; HomerTaco Thin Lip Raptor grille; sPod SE System w/ LCD Touchscreen; Baja Design OnX6 40; Baja Design S2; Rigid Industries LED Rock Lights; Front Runner Slimline II Roof Rack; A.R.E. Z Series Camper Shell Projector BHLM Headlights (with custom wiring); Method Racing NVs 17x 8.5; and Nitto Terra Grappers 265/60/17

TRD Nations Truck Meet & Camp June 18th & 19th Photo & Video Thread!

Post your own photos in our Members Gallery

Failure is the result of letting setbacks stop you

Kit 2 Includes: Two reading + dome light + 2 vanity visor lights -$24.99

Interior Dome LED Light Kits

Total Chaos +2 Long Travel Kit; King/TC 2.5 LT C/O w/ 16×600; TC/CVJ Extended Axles; TC Spindle Gussets; King 2.5 RR shocks; All-Pro Expendition Leaf Pack; Pelfreybilt Sliders; Anti-Dark LED Hood Light mod; LED map and dome light mod; Bed lights; TRD Cold Air Intake; KB Voodoo Tailgate cap system; HomerTaco Thin Lip Raptor grille; sPod SE System w/ LCD Touchscreen; Baja Design OnX6 40; Baja Design S2; Rigid Industries LED Rock Lights; Front Runner Slimline II Roof Rack; A.R.E. Z Series Camper Shell Projector BHLM Headlights (with custom wiring); Method Racing NVs 17x 8.5; and Nitto Terra Grappers 265/60/17

Leave a Reply